FGD wastewater treatment in biomass power plant

Instrumentation in water treatment

Flue Gas Desulfurization (FGD) wastewater from solid fired power plants is often saturated with calcium sulphate, while containing both metals and chlorides. The process steps of treatment must be adapted to the particular wastewater and often consist of chemical treatment, flocculation and clarifiers and filtration. The water can be reused in the process or further be polished for higher requirements.

Especially in these processes with sedimentation a reliable measurement of the sludge level and sludge profile is essential for a safe clarifier performance and an efficient use of flocculant. With the OPTISENS TSS/ MAC and OPTISYS SLM different analysers and systems of the for TSS interface and profile measurement are available beside a range of rugged and corrosion resistant instruments for flow, level, pressure and temperature measurement.

Requirements
  • Insensitive against scaling
Requirements
  • Process control
Requirements
  • Immersionprobe
Requirements
  • Insensitive against scaling
Requirements
  • Process control
Requirements
  • Low maintance requirements
  • No drift
Requirements
  • Insensitive against scaling
Requirements
  • Immersionprobe
Requirements
  • Low maintance requirements
Requirements
  • No maintanance
Requirements
  • Process control
Requirements
  • Process control
Requirements
  • Immersionprobe
Requirements
  • Process control
Requirements
  • Low maintance requirements
Requirements
  • No maintanance
Requirements
  • No maintanance
  • High moisture
Requirements
  • Local CT requirement
Requirements
  • Low maintance requirements
Requirements
  • No maintanance
  • High moisture
Requirements
  • No maintanance
  • High moisture
Requirements
  • Process control
Requirements
  • Complete system ready for operation
  • Process control
Email
Contact