Compact orifice plate flowmeter

Integral DP flowmeter for liquids, gases and steam

  • Fast and easy installation without additional engineering, impulse lines and supports
  • Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
  • Line size: DN50…600 / 2…24"
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA

Compact orifice plate flowmeter

Integral DP flowmeter for liquids, gases and steam

  • Fast and easy installation without additional engineering, impulse lines and supports
  • Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
  • Line size: DN50…600 / 2…24"
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA

Overview

The compact orifice plate with OPTIBAR DP transmitter is an economic DP flowmeter for a broad range of applications – from demi-water to chemicals to steam. The integral orifice plate is a one-piece design per ISO 5167-2 or ASME MFC-3M, consisting of a compact orifice plate, a sandwich meter body, impulse lines and a connection flange. KROHNE offers the complete DP flow solution with integral orifice plate, manifold and DP transmitter. It comes pre-assembled, preconfigured and pressure tested – ready for immediate commissioning. There is absolutely no need for routing of impulse lines, valves and supports. In this way, material costs and installation efforts are significantly reduced.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Reduced installation costs: no installation of further components such as valves, DP transmitter, impulse lines, supports
  • No external impulse lines: reduced risk of leakage
  • Standardised flow element according to ISO 5167-2
  • Low TCO due to reduced engineering, commissioning and installation costs
  • Reduced need for recalibration in the field through advanced 3-D linearised OPTIBAR DP transmitters
  • Complete flowmeter solution with compact orifice plate, manifold, DP transmitter, sizing and documentation from a single source
  • Standard material: 316/316L, other materials on request
  • Redundant versions, pressure and temperature compensated versions available
  • Redundancy available (1oo2, 2oo3)
  • HART®7, Foundation fieldbus and Profibus-PA communication options
  • SIL 2/3 certified versions
  • Ex ia, Ex d approvals
Related products
OPTICHECK Pressure Mobile
Mobile app for pressure transmitters
  • Works with all OPTIBAR PM 5060, OPTIBAR PC 5060 and OPTIBAR DP 7060 equipped with Bluetooth display and adjustment module
  • Wireless device commissioning, verification and monitoring even in hard-to-reach areas
  • Parameterisation similar to PACTware DTM including remote SIL mode activation
  • Free download for iOS and Android
OPTIBAR FC 1000
Flow computer for liquids, gases and steam
  • High performance flow and energy calculation with DP flow elements, volumetric or mass flowmeters
  • Compact design, quick and easy-to-operate via TFT touch screen
  • Enables split-range operation with two pressure transmitters for increased measuring dynamics
  • HART® communication with all common DP transmitters for loss-free measured data transmission and possibility of automatic zero point adjustment
OPTIBAR DP 7060
Differential pressure transmitter for flow, level, differential pressure, density and interface measurements
  • High performance DP transmitter with integrated line pressure measurement
  • Measuring range: 30 mbar…16bar / 0.44…232 psi; Line pressure: up to 700 bar / 10,153 psi
  • Reference accuracy of ±0.065%
  • 2-wire, 4…20 mA/HART®, FF, Profibus-PA, Bluetooth®
OPTIBAR OP 1100
Orifice plate with RF sealing face
  • For mounting between measuring flanges (ASME 16.36, 16.5, 16.47 A)
  • Size: ½…24"; up to ASME Cl 2500
  • Temperature: up to +450°C / +842°F
  • Material: 1.4404 / 316L
OPTIBAR OP 1110
Orifice plate with RTJ sealing face
  • For mounting between measuring flanges (ASME 16.36, 16.5)
  • Size: 1…24"; up to ASME Cl 2500
  • Temperature: up to +450°C / +842°F
  • Material: 1.4404 / 316L
OPTIBAR OP 3100
Orifice plate with flat sealing face and corner taps
  • Separate type, with carrier ring and optional shut-off valve
  • Size: DN50…600; up to PN100
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 3200
Orifice plate with flat sealing face and corner taps
  • Compact type, with carrier ring, flange plate and optional manifold
  • Size: DN50…600; up to PN100
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 4100
Orifice plate with annular chamber and corner taps
  • Separate type, for installation between standard flanges (EN 1092-1), optional shut-off valves
  • Size: DN50…600; up to PN100
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 5100
Orifice assembly with measuring flanges (ASME 16.36)
  • With RF sealing face and flange taps
  • Size: 1…24"; up to ASME Cl 2500
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 5110
Orifice assembly with measuring flanges (ASME 16.36)
  • With RTJ sealing face and flange taps
  • Size: 1…24"; up to ASME Cl 2500
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
Email
Contact