OPTIFLUX 4050

Electromagnetic flowmeter for basic applications with abrasive and aggressive liquids

  • Chemically resistant liner materials
  • With extra isolation of electronics for use in high humidity areas
  • Flange: DN2.5…1200 / 110…48", max. PN40 / ASME Cl 1500
  • 4…20 mA, pulse, frequency, status, HART®, Modbus

OPTIFLUX 4050 C – Compact version

OPTIFLUX 4050 C Electromagnetic flowmeter – Compact version

The OPTIFLUX 4050 is an electromagnetic flowmeter (EMF) for chemical applications in non-hazardous areas. It provides cost-effective measurements with good accuracy and standard diagnostics and communication options. The extra isolation of the electronic device and housing makes this EMF particularly suitable for use in areas with extreme humidity and chances of flooding.

The OPTIFLUX 4050 features a selection of chemically resistant liners and electrodes. Due to its full bore design without moving or intruding parts, there is no pressure loss and no maintenance required. The EMF comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the EMF without process interruption can be carried out using the OPTICHECK service tool.

Product highlights

  • Bi-directional flow measurement over a wide dynamic range (turn down ratio: 1000:1)
  • Tropicalized electronics for use in areas with extreme humidity and chances of flooding
  • Excellent price/performance ratio
  • PTFE, PFA, ETFE, hard rubber, soft rubber or PU liner: excellent chemical and abrasion resistance
  • Signal converter with display or as blind version
  • Full bore design: No moving parts, no wear, no pressure loss
  • On-site verification of flowmeter with OPTICHECK service tool

Typical applications

General

  • Applications with clean, aggressive or slightly abrasive liquids
  • Applications in areas with extreme humidity and chances of flooding

Chemical and other process industries

  • Conductive fluid chemicals
  • Process water, cooling water

Pulp and paper industry

  • Paper pulp
  • Chemicals (black liquor, bleach, etc.)

KROHNE Academy Online

Related products

IFC 050

Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors

  • Compact and wall-mounted housing (with or without display)
  • With sensor and process diagnostics for basic requirements
  • 4-wire, 1 x 4…20 mA, pulse, frequency, status, HART®, Modbus etc.
View product details

OPTIFLUX 4000

Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters

  • Full bore design: pipe cross-section without restrictions
  • Connection sizes: DN2.5…3000 / 110…120"
  • Liner: PTFE, PFA, ETFE, PU, hard and soft rubber
View product details

OPTICHECK Master

Handheld for in-depth verification, device commissioning and monitoring

  • On-site performance check and verification (level 0,1,2) without process interruption
  • Convenient commissioning of field devices, e.g. zero calibration
  • Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
View product details

OPTICHECK DTM

DTM for advanced device verification and commissioning

  • Usable with any FDT frame application from the control room or on site
  • Advanced verification (level 0,1) without process interruption
  • Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
View product details