Electromagnetic flowmeters
For all applications with conductive liquids
- From basic to demanding flow measurements, incl. custody transfer and safety-related applications (up to SIL 2/3)
- Designs and liner materials for virtually any application – from potable water to extremely adhesive, abrasive and aggressive liquids
- Large choice of nominal sizes up to DN3000 / 120"
OPTIFLUX 4400
Electromagnetic flowmeter for safety instrumented systems (SIS) and high-accuracy requirements
- Certified for safety applications up to SIL 2/3, with automated partial proof test capability for extended proof test intervals
- Best-in-class diagnostic test interval incl. fault response time of only 2 minutes
- SIL 2/3 up to DN600 / 24"; non-SIL up to DN2000 / 80" (larger on request)
- Pulse, frequency, status, 4…20 mA, HART®7
OPTIFLUX 1050
Electromagnetic flowmeter for basic applications with conductive liquids
- Cost-effective flow measurement of liquids (≥5 μS/cm) up to +120°C / +248°F
- Extra isolation of electronics for use in high humidity areas
- Wafer-style design: DN10…150 / ⅜…6", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®, Modbus
OPTIFLUX 1100
Electromagnetic flowmeter for general applications with conductive liquids
- Economical flow measurement of liquids (≥5 μS/cm) with solid content (≤10%)
- -25…+120°C / -13…+248°F
- Wafer-style design: DN10…150 / ⅜…6", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®
OPTIFLUX 1300
Electromagnetic flowmeter for OEM applications, dosing systems and compact skids
- Economical flow measurement of liquids (≥5 μS/cm) with solid content (≤70%)
- -25…+120°C / -13…+248°F
- Wafer-style design: DN10…150 / ⅜…6", max. PN40 / ASME Cl 300
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
OPTIFLUX 2050
Electromagnetic flowmeter for basic water and wastewater applications
- Liner materials resistant to low concentrated chemicals
- With extra isolation of electronics for use in high humidity areas
- Flange: DN25…1200 / 1…48", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®, Modbus
OPTIFLUX 2100
Electromagnetic flowmeter for all standard water and wastewater applications
- Chemically resistant liner materials
- Compact version up to IP69, remote version IP68
- Flange: DN25…1200 / 1…48", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®
AF-E 400
Electromagnetic flowmeter for utilities and industrial automation
- Flow measurement of conductive liquids, e.g. coolants, cold/hot water, chemicals, etc.
- Best-in class temperature range, accuracy, pressure drop and flow range
- Ultra-compact design for parallel installation and tight spaces
- 4…20 mA, pulse, frequency, Modbus, IO-Link
OPTIFLUX 2300
Electromagnetic flowmeter for advanced water and wastewater applications
- High accuracy (±0.2%), with CT approvals (OIML R49, MI-001)
- 0D/0D installation acc. to MID MI-001 and OIML R49 accuracy class 1
- Flange: DN25…3000 / 1…120", max. PN40 / ASME Cl 300
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
TIDALFLUX 2300
Electromagnetic flowmeter for applications with partially filled pipes
- With integrated capacitive level measurement for flow measurement of water and wastewater (≥10% pipe fill level)
- Accurate (±1%) and cost-saving alternative to open channel systems
- Flange: DN200…1600 / 8…64"
- 3 x 4…20 mA, pulse, HART®, Modbus, PROFINET
WATERFLUX 3050
Electromagnetic flowmeter for basic water applications
- Cost-effective measurement of potable, raw and irrigation water
- Extra isolation of electronics for use in high humidity areas
- Flange: DN25…600 / 1…24", max. PN16 / ASME Cl 150; others on request
- 4…20 mA, pulse, frequency, status, HART®, Modbus
WATERFLUX 3070
Electromagnetic water meter for district metering of potable water and custody transfer (CT) measurement
- Battery- or mains powered, with battery backup option (incl. Modbus)
- Integrated temperature and pressure measurement for leak monitoring
- CT: MI-001, OIML R49 up to DN600 / 24", no inlet/outlet runs needed
- Burial installation possible (IP68)
WATERFLUX 3100
Electromagnetic flowmeter for standard water applications
- From raw water measurement to drinking water metering in distribution networks
- No inlet/outlet runs needed
- Up to DN600 / 24", max. PN16 / ASME Cl 150
- 4…20 mA, pulse, frequency, status, HART®
Showing 12 of 31