OPTITEMP TT 51 R

Rail-mounted temperature transmitter with universal dual input, galvanic isolation, HART® and SIL

  • Input: RTD, TC, mV, Ω
  • Output: 2-wire, 4…20 mA/HART®
  • Programmable via PC or HART® handheld communicator
  • Accuracy: ±0.05%

OPTITEMP TT 51 R

Rail-mounted temperature transmitter with universal dual input, galvanic isolation, HART® and SIL

  • Input: RTD, TC, mV, Ω
  • Output: 2-wire, 4…20 mA/HART®
  • Programmable via PC or HART® handheld communicator
  • Accuracy: ±0.05%

Overview

The OPTITEMP TT 51 R is a universal, programmable high-performance 2-wire rail-mounted temperature transmitter with HART® communication. The galvanically isolated dual input device works with RTD elements, thermocouple (TC) elements or other inputs (mV and Ω). The device is available in 2-, 3- or 4-wire circuit. It also features the option of a 4-wire circuit for two Pt100 inputs. The transmitter stands for proven stability, reliability as well as high accuracy and boasts a minimum measuring error of ±0.05% of span in 5 years. The transmitter offers extended diagnostic information (e.g. open or short circuit monitoring etc.). Its unique "SmartSense" function allows insulation resistance monitoring to prevent measuring errors.

  • Highly precise, completely universal digital device, with dual sensor input
  • Configuration, installation and maintenance via software ConSoft, HART® protocol or EDD
  • Optional redundant 4-wire circuit for 2 x Pt100
  • Best in class for long-term stability: ±0.05% of span in 5 years
  • Fast response time, high speed update (300 ms)
  • High reliability due to 50-point linearisation, sensor drift detection and sensor backup
  • Sensor break monitoring, failure detection and error correction
  • Isolation resistance monitoring (SmartSense): fail-safe up to 95% relative air humidity
  • Rugged design: vibration-resistant up to 10 g
  • Galvanic isolation: 1500 VAC
  • Conforms to NAMUR in accordance with NE 43, NE 53, NE 89, NE 107
  • Conforms to EMC in accordance with EN 61326 and NE 21
  • SIL2 certified
  • Can be configured via ConSoft while staying connected with a sensor installed in hazardous areas
  • Designed for installation on a rail (in accordance with DIN EN 60715)
  • Available as intrinsically safe: ATEX, IECEx (zone 0, 1, 2)
Email
Contact