Description

Water feed pressure measurement

Requisitos para el punto de medición

  • Process control

Description

Air feed pressure measurement

Requisitos para el punto de medición

  • Process control

Description

Flow measurement of natural gas intake

Requisitos para el punto de medición

  • No maintenance required
  • High flow volume rates

Description

Flow measurement of fresh air intake

Requisitos para el punto de medición

  • Measuring pipe with no protruding parts
  • large dynamic range

Description

Pressure measurement in the synthesis gas reactor

Requisitos para el punto de medición

  • Control of the pressure during reaction
  • Stable against hydrogen

Description

Steam measurement

Requisitos para el punto de medición

  • Integrated energy calculator
  • Integrated pressure and Temperature via HART

Description

Flow measurement of synthesis gas

Requisitos para el punto de medición

  • High CO2 content
  • Integrated volume correction to standard conditions

Description

Scrubber sump level measurement

Requisitos para el punto de medición

  • Level control

Description

Pressure measurement in the gas scrubber / CO2 separation using alkali scrubber

Requisitos para el punto de medición

  • Monitoring of scrubber pressure
  • Stable against scrubber agent

Description

Level measurement of absorbent for carbon dioxide

Requisitos para el punto de medición

  • Absorbent level in horizontal cylindric tank
  • Flush mounted antenna

Description

Flow measurement in the CO2 scrubbing agent cycle

Requisitos para el punto de medición

  • Electrodes and liner resistant against high alkalinity
  • Empty pipe message configurable (for scrubber refill period)

Description

Temperature measurement of the circulating CO2 scrubbing agent

Requisitos para el punto de medición

  • For desorption control
  • Short T90 time

Description

Truck loading of liquid ammonia

Requisitos para el punto de medición

  • Low pressure loss
  • integrated temperature measurement

Description

Integrated control valve with flow, pressure and temperature measurement of water

Requisitos para el punto de medición

  • Injected water controlled according to process
  • High control accuracy using integrated smart valve

Overview

Ammonia production in the industrial gas process

Instrumentation for high precision and reliable measurements in ammonia production

Ammonia is used as an industrial gas in diverse industrial fields in varying purity grades and qualities – for example for the nitration hardening of steel, as a refrigerant, in flue gas cleaning or for chemical synthesis for producing nitric acid, amines or nitrates, as well as for the production of plastics and synthetic fibres.
Synthesis gas is always the base product for industrial ammonia production. Synthesis gas for ammonia synthesis is manufactured by partial oxidation with air. The carbon monoxide that always occurs when natural gas is used is converted to CO2 and additional hydrogen with water vapour in a second reaction stage.
After the CO2 is separated in the gas scrubber a mixture of N2 and H2 is obtained. In another ancillary process, the CO2 scrubbing agent is also regenerated.
The next process step for ammonia synthesis is based on the classic Haber-Bosch process. For this, the hydrogen and nitrogen extracted beforehand in the synthesis gas process are catalytically converted to ammonia in another reactor at high temperatures and high pressure. For the most part, the ancillary processes involve elaborate and complex purification and treatment processes, for example the regeneration and separation of the CO2 scrubbing agent.

For the area of industrial gas production, for example ammonia, KROHNE's range includes high-precision ultrasonic flowmeters, which reliably measure the flow of process gases without moving parts in the measuring tube. They do not cause any pressure loss, are low-maintenance and highly durable. There are also industrial resistance thermometers and electronic differential pressure measuring devices. And we also have non-contact radar level meters in our range for monitoring the ammonia reservoirs and the scubbing agent regeneration. These provide reliable results, even under harsh process conditions.
The flowrate of the absorber liquid (e.g. ethanolamine/water) is measured using electromagnetic flowmeters. Gas scrubbing can be controlled and optimised on this basis. The sophisticated measuring equipment enables precise adjustment of optimal process conditions.

Correo eléctronico
Contacto