The PipePatrol Health Check is a complete audit of the pipeline leak detection techniques and management approaches to check all areas of leak detection on an operator‘s pipeline or pipeline network with the goal of ensuring that all the required areas of leak detection are functioning properly.
It is the most comprehensive audit program available for pipeline leak detection. PipePatrol Health Check covers the physical state of the system, performance of the system, compliance with standards and regulations including API, 49 CFR 195, CSA Z662 and TRFL and fundamental aspects such as the readiness of an organisation to deal with an emergency. It is performed by specialists based on over 35 years of experience in leak detection on over 400 pipeline projects.
A PipePatrol Health Check can be started with a subset of tests to guarantee the most critical issues are addressed. Later, the test program can be extended to full coverage and a long-term test strategy can be implemented. In this way, continuous reliability and improvement are possible. In any case, initial and reoccurring testing of the system is recommended or required by regulation to guarantee consistent performance during the whole lifetime of the system.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The most comprehensive test program available, covers
Physical state of the system
Performance of the system
Compliance with standards and regulations (API, CSA, TRFL, etc.)
Performed by specialists based on over 35 years of experience in leak detection on over 400 pipeline projects
Crude oil pipelines from oil fields to refineries
Multiproduct pipelines from refineries to tank farms
Subsea pipelines from FPSO units and platforms
Non-continuously operated transport pipelines (e.g. for jet fuel)
Water pipelines from desalination plants to cities
Natural gas pipelines
1 / 1
PipePatrol Leak Detection
Solution for pipeline leak detection and localisation
E-RTTM (Extended Real Time Transient Model) based leak detection and localisation
Highly accurate and extremely reliable leak information
Meets API 1130, API 1175, AB 864, German TRFL standards and CSA Z662
System is either independent, or can be integrated with existing systems